CRIC IdeaLab Makerspace

Explore the Lab

The CRIC IdeaLab, located in the Pam Kirkpatrick Branch (Tottenham), was funded by Tottenham’s Community Recreation Improvement Committee (CRIC). Because of their generous donation, we are able to offer this makerspace to our patrons.

Lab Hours

Tuesdays	2:00 PM – 8:00 PM
Wednesdays	12:00 PM – 6:00 PM
Thursdays	2:00 PM – 8:00 PM
Fridays	12:00 PM – 5:00 PM

When staffing allows, the IdeaLab may be open on Saturdays from 12:00 PM – 5:00 PM and Sundays from 10:00 AM – 3:00 PM. We recommend reaching out to the IdeaLab Specialist to book an appointment: [email protected].

Please note that while drop-ins are always welcome, we recommend booking a time to ensure access to the equipment and if you need assistance from staff. The CRIC IdeaLab will be closed during programming within the space and if IdeaLab programs take place in other branches.

Please note hours are subject to change without notice if there is a staffing shortage in any of our branches.

Lab Equipment

A picnic table sits on a grassy bank beside a calm pond, surrounded by trees under a clear blue sky.

3D Printers

We have two Bambu Lab P2S 3D Printers. These printers can be used to print a variety of plastic filaments into interesting 3-dimensional shapes.

We have two Bambu Lab P2S 3D Printers. These printers can be used to print a variety of plastic filaments into interesting 3-dimensional shapes. You are only limited by your own creativity, and the size of the printers themselves. Whether it’s an ornament or some sort of decor, a pot for a houseplant, your favourite doll or action figure, a replacement part for a machine, a fidget toy, or a display stand, if you can imagine it, you can probably print it.

How to Print: Any 3D files that require printing should be sent to the IdeaLab Specialist at [email protected] along with additional instructions such as: type of plastic filament, whether or not the design requires supports, and any specifications for print speed, acceleration, layer height, wall thickness, etc…

Pricing: We charge a $1.00 base fee + $0.10 per gram of filament.

Resources:
Visit TinkerCAD for free 3D Modeling software

Visit Thingiverse, makerworld.com, printables.com, and cults3d.com for projects other people have already created.

Show less

Cricut

We have a Cricut Maker 3 and an Explore Air 2 in the Idealab, which are used to cut, score, and draw on a variety of materials.

We have a Cricut Maker 3 and an Explore Air 2 in the Idealab, which are used to cut, score, and draw on a variety of materials. Common projects include: adhesive vinyl letters or signage, heat transfer applications such as t-shirts or mugs, custom cards, and other paper crafts.For heat transfers we have a Cricut Easy Press and a Cricut Mug Press.

Using the Cricuts: For use of the Cricuts contact the IdeaLab Specialist at [email protected] to book a time. Use of any of our heat transfer equipment must be done under supervision of staff or by a staff member for safety reasons.

Pricing: Varies based on size/type of material.
Permanent/Removable Vinyl – $0.10/sq. inch
Heat Transfer Vinyl – $0.20/sq. inch
Infusible Ink – $0.50/sq. inch
Transfer Tape – $0.05/sq. inch
Stickers – $2 per page
Cardstock – $0.50 per page

Please contact the IdeaLab Specialist at [email protected] for more information.

Resources:
Cricut Design Space is used to design and execute Cricut projects.

Use Inkscape to edit and create 2D graphics for use with the Cricuts or laser cutter.

Show less

Sewing and Embroidery Machines

We have several Singer Stylist Sewing machines, as well as a Brother serger sewing machine and a Brother embroidery machine.

Show less

A/V Equipment

Here at NTPL we have our very own A/V recording and multimedia space located in our CRIC IdeaLab.

Here at NTPL we have our very own A/V recording and multimedia space located in our CRIC IdeaLab. The space is equipped with a Sony A7 iii camera, two Behringer condenser microphones, a digital keyboard, a Focusrite Audio Interface, an HP Envy laptop, a Digital illustration pad, digitization equipment, and access to some Creative software – Audacity for audio editing and Krita for digital painting.

Note: As our recording space is located in an open concept room with our other equipment we can’t guarantee that the space will always be noise free.

Show less

S.T.E.A.M. Toys

We have a variety of Science, Technology, Engineering, Arts, and Mathematics toys available for use in our IdeaLab.

Show less

Robots & Tablets

We have a selection of robots and a set of Samsung tablets that are available for use in our IdeaLab.

We have a selection of robots and a set of Samsung tablets that are available for use in our IdeaLab. The robots we own include 8 Dash robots, 1 Dot robot, 1 Cue Onyx robot, 1 Sphero and a Lego Mindstorms Robotics set. These robots are a great resource for those wanting to get started with or develop block coding skills. Block coding is a great way to develop the procedural thinking involved in coding without needing to know a programming language.

Usage: We often use these robots for Children’s and Youth programming, so be on the lookout! Robots can also be made available for drop-in use upon request.

Show less

Did you know? The library has gadgets and tools you can borrow! Explore what’s available on our Library of Things page.

Library of Things

CRIC IdeaLab Makerspace

Explore the Lab

Lab Hours

Lab Equipment

3D Printers

Cricut

Sewing and Embroidery Machines

A/V Equipment

S.T.E.A.M. Toys

Robots & Tablets

Connect with us on TikTok

Connect With Us

Google Translate